• RSS New Products

  • RSS Forums

    • Dura Pulse Momentary Power Loss March 12, 2010
      Im having trouble with a drive giving Mom Power loss when backup generator transfer's back to normal power after power failure. I added a 05 plc to...
      StanElec
    • DO-06 Analog Read Error March 12, 2010
      Have a DO-06DR PLC with a combo analog card 4 in/ 2 out (F)-4AD2DA-1. The first input is not reading the analog loop correctly. A 12mA current...
      ScottFilip
    • DL05 question March 12, 2010
      Hi all, a quick question for the experts out there! A customer of ours has a DL05 connected to an Optimate 1500 and is using an analog card in...
      dwalker611
    • DS5 Printing challenge March 12, 2010
      This has to be trivial, but I can't for the life of me figure it out... I use B633.0 through B640.something as status indicators that are...
      clintonp
    • DC Drives, Fused or Busbar with Fuse March 10, 2010
      Hi there, I am new to the forum. Please pardon me if there is any posting that is wrongly posted. I have two questions about fusing. 1) ...
      AmazingTrans

Automated Conveyor Delivery System

Posted on October 27th, 2009 by andremholmes

This ITT-Tech student conveyor project moves products from three locations and sorts and delivers those products to three separate locations based on color codes.
To move the items, we use a main conveyor with two infeed and two outfeed conveyors attached to it. The two infeed conveyors transfer cargo to the main conveyor as long as [...]

Filed under: Projects | 1 Comment »

Kettering University Titanic Pinball Machine

Posted on October 8th, 2009 by kettering_pinball

As an electrical engineering  senior design capstone project at Kettering University located in Flint Michigan, we were required to build a pinball machine. The machine was to utilize a PLC to control scoring inputs, light outputs, reset button, and control the electromagnets and doorbell. The PLC my group selected was the DirectLogic DL-06, and we [...]

Filed under: Projects | 1 Comment »